208
Periodic Maintenance - Service Schedule-Z Car Full Electric
` 1 Month 6 Months 1 Year 2 Years 3 Years 4 Years 5 Years 6 Years 7 Years 8 Years 9 Years 10 Years
OPERATION / PROCESSES FOR PERIODIC SERVICE
SCHEDULE`
Replacement
Frequency: Km /
Year whichever is
earlier
1000
5000
10000
20000
30000
40000
50000
60000
70000
80000
90000
100000
Vehicle Interior and Exterior
Check the function of the parking brake Inspection only I I I I I I I I I I I I
Check the interior and exterior lighting, horn and system warning
display functions.
Inspection only I I I I I I I I I I I I
Check the surfaces of windscreen and rear window, and the
working condition of wipers and washers.
Inspection only I I I I I I I I I I I I
Check the status and function of seat belt. Inspection only I I I I I I I I I I I I
Check various control functions of A/C. Inspection only I I I I I I I I I I I I
Check AC filter, replace if necessary. 10K/1 Year I I R R R R R R R R R R
Check the status and function of seat. Inspection only I I I I I I I I I I I I
Check the conditions of front compartment cover lock, tailgate
lock, door locks, hinges, door checks, etc., clean up all the dust and
refill lubricating grease as necessary.
Inspection only I I I I I I I I I I I I
Front Compartment
Check the connection and status of 12V battery. Inspection only I I I I I I I I I I I I
Check the high-voltage harness for mutual interference, wear or
damage.
Inspection only I I I I I I I I I I I I
Check the washer fluid level and add to the standard level as
necessary.
10K/1 Year I I I I I I I I I I I I
Check brake fluid level and add to the standard level as necessary. 30 K KM/3 Years I I I I R I I R I I R I
Check transmission fluid levels, and add to the standard level as
necessary.
80 K KM/8 Years I I I I I I I I I R I I
Check the status of cooling system pipeline and connecting parts. Inspection only I I I I I I I I I I I I
Symbol Abbreviation : R - Replace • I - Inspect- Top up if require-Adjust-Clean-Refill. Check the coolant level and top up as required, replace if it is contaminated/discoloured or there is sludge formation.
** Tightening of underbody fasteners, door adjustments and functional checks of all the systems during every service is mandatory - Check and Rectify.
Maintenance Interval
To Next Page
Loading...
