MG ZS EV - Page 76

64
 Ensure no foreign or sharp objects
become lodged in the seat belt
mechanisms. DO NOT allow
liquidstocontaminatetheseatbelt
buckle, this could affect the buckle
engagement.
Seat belts should only be cleaned with warm
soapy water. DO NOT use any solvent to
clean the seat belt. DO NOT attempt to
bleach or dye the seat belt, it may weaken the
seat belt. After cleaning, wipe with a cloth and
allow to dry. DO NOT allow the seat belt to
fully retract before it is completely dry. Keep
seat belts clean and dry.
If there are contaminants accumulated in the
retractor, the retraction of the seat belt will
be slow. Please use a clean and dry cloth to
remove any contaminants.
Replacing Seat Belts
Collision accidents may damage
the seat belt system. The seat belt
systemmay not beableto protect
users after damage, which may
result in serious injury or even
death. After an accident, seat belts
shouldbecheckedandreplacedas
needed immediately.
Seat belts should not require change after
minor collisions, however, some other parts
of the seat belt system may require attention.
Please consult an MG Authorised Repairer
for advice.
Seats & Restraints