MG ZS EV - Page 86

74
1 Fasten vehicle-approved ISOFIX child
restraint systems to the mounting
brackets.
2 When using ISOFIX mounting brackets
for seat mounting, universally approved
child restraint systems for ISOFIX may
be used.
3 To fasten the top tether strap of the child
restraint system, route the tether strap
under the head restraint and attach to
the anchorage hook being careful not to
twist the strap. If not using ISOFIX lower
anchorages, using the seatbelt, complete
the installation in line with the child
restraint manufacturers instructions.
Note: When using seat mounting,
universally approved child restraint
systems,Top-tethermustbeused.
4 After installation apply suitable force to
ensure the restraint is securely fastened.
Seats & Restraints