RF Exposure
This Transceiver generates RF electromagnetic energy while transmitting. For
compliance with RF exposure limits, the antenna gain should not exceed
0dBd (dipole antenna) and any persons should maintain a distance of at least
1m/3ft from the antenna during operation.
Do not operate this Transceiver in an explosive atmosphere.
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC ID: 2ANEFV16
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Industry Canada approval notes
If this device is intended to be operated on board an aircraft, the V16 transceiver shall only be
operated in accordance with Regulation by Reference RBR-1, Technical Requirements for the
Operation of Mobile Stations in the Aeronautical Service, as issued by the Minister of Industry.
General
This manual documents the installation and use of the V16 air band transceiver. Please note
that operation of the transceiver with respect to settings such as frequency, volume etc is
done by the connected control panel. User interface varies by type of connected system.
Please refer to documentation for the connected equipment for details.
This manual describes available settings through the connected equipment in a generic way
that is applicable to all types.
Document history
1 November 2017, first release.
11 January 2018, added information on TX power tolerance and modulation characteristics.
20 July 2018, added Industry Canada note, added instruction on how to adjust microphone
levels.
Description
The V16 airband transceiver is a split module consisting out of the transceiver body and
optional external control. External control can take the form of one or more panel mount
To Next Page
Loading...
