English – 1
English
GENERAL SAFETY WARNINGS AND PRECAUTIONS
STEP 1 2
KNOWLEDGE OF THE PRODUCT AND PREPARATION FOR
INSTALLATION
STEP 2 2
2.1 - PRODUCT DESCRIPTION AND INTENDED USE 2
2.2 - COMPONENTS USED TO SET UP A COMPLETE SYSTEM 3
PRELIMINARY CHECKS FOR INSTALLATION
STEP 3 3
3.1 - CHECKING SUITABILITY OF GATE TO BE AUTOMATED AND
RELATIVE ENVIRONMENT 3
3.2 - PRODUCT APPLICATION LIMITS 3
3.3 - PRODUCT DURABILITY 3
STEP 4 4
4.1 - PRELIMINARY CHECKS FOR INSTALLATION 4
4.2 - PREPARING ELECTRIC CABLES 4
INSTALLATION: ASSEMBLY AND CONNECTION
OF COMPONENTS
STEP 5 6
5.1 - INSTALLING THE GEARMOTOR WG1SK 6
STEP 6 6
6.1 - INSTALLING CL2S 6
6.2 - INSTALLING AND CONNECTING PHOTOCELLS PH100 7
6.3 - INSTALLING AND CONNECTING THE FLASHING LIGHT FL100 7
6.4 - ELECTRICAL CONNECTION TO CONTROL UNIT CL2S 7
PROGRAMMING
STEP 7 13
7.1 - POWER SUPPLY CONNECTION 13
7.2 - INITIAL CHECKS 13
7.3 - LEARNING CONNECTED DEVICES 13
7.4 - LEARNING THE GATE LEAF OPENING AND CLOSING ANGLES 13
7.5 - CHECKING THE RADIO TRANSMITTERS 13
7.6 - SETTING 13
TESTING AND COMMISSIONING
STEP 8 15
8.1 - TESTING 15
8.2 - COMMISSIONING 15
MAINTENANCE
STEP 9 15
PRODUCT DISPOSAL 15
FURTHER INFORMATION
STEP 10 16
10.1 - ADVANCED SETTINGS 16
10.2 - OPTIONAL ACCESSORIES 17
10.3 - ADDING OR REMOVING DEVICES 19
10.4 - MEMORIZING ALL RADIO TRANSMITTERS 20
10.5 - TROUBLESHOOTING 22
10.6 - DIAGNOSTICS AND SIGNALS 22
TECHNICAL SPECIFICATIONS OF PRODUCT
COMPONENTS 25
APPENDIX 1 - EC declaration of conformity 28
USER’S GUIDE
STEP 11 29
11.1 - SAFETY INSTRUCTIONS 29
11.2 - GATE CONTROL 29
11.3 - MANUALLY RELEASING OR LOCKING THE GEARMOTOR 29
11.4 - MAINTENANCE OPERATIONS ADMISSIBLE TO THE USER 30
11.5 - REMOTE CONTROL BATTERY REPLACEMENT 30
11.6 - REMOTE CONTROL BATTERY REPLACEMENT 30
APPENDIX 2 - EC declaration of conformity 31
CONTENTS
To Next Page
Loading...
