MCP2221 I
2
C DEMONSTRATION
BOARD USER’S GUIDE
2016 Microchip Technology Inc. DS50002480A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP2221 I
2
C Demonstration Board. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MCP2221 I
2
C Demonstration Board as an
evaluation tool to debug a target motor system. The manual layout is as follows:
• Chapter 1. “Product Overview” – Important information on the board.
• Chapter 2. “Installation and Operation” – Covers the initial setup of this board
and the Graphical User Interface (GUI).
• Chapter 3. “Testing Board Features” – Describes how to use the board’s
capabilities.
• Chapter 4. “Creating Custom I
2
C Software Applications”– Provides
information for the custom usage of the board.
• Chapter 5. “Troubleshooting”– Provides procedures for troubleshooting the
most common problems encountered when installing and operating the board.
• Appendix A. “Schematics and Layouts” – Shows the schematic and layout
diagrams for the board.
• Appendix B. “Bill of Materials (BOM)” – Lists the parts used to build the board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
To Next Page
Loading...
Need help?
General
