4.2.4.2 Advanced Wireless Settings
This router provides some advanced control of wireless parameters. If users want to
configure these settings, please click <Wireless> menu on the left of web
management interface, and then click <Advanced Settings>. The following
message will be displayed on the web browser.
Parameter Description
Fragment Threshold
"Fragment Threshold" specifies the maximum size of packet
during the fragmentation of data to be transmitted. If users set
this value too low, it will result in bad performance.
Default: 2346.
RTS Threshold
When the packet size is smaller the RTS threshold, the
wireless router will not use the RTS/CTS mechanism to send
this packet.
Default: 2347.
Beacon Interval
The interval of time that this wireless router broadcast a
beacon. Beacon is used to synchronize the wireless network.
Default: 100.
DTIM Period
Set the DTIM period of wireless radio.
Default: 3.
Data Rate
The “Data Rate” is the rate this access point uses to transmit
data packets. The access point will use the highest possible
selected transmission rate to transmit the data packets.
39
To Next Page
Loading...
