Micropack FDS303 - Default Chapter; Table of Contents

2
FDS303 Safety and Technical Manual
Rev: 1.7 ECN: 4535 Ref: 3303.0001
FDS303 Flame Detector
This document is strictly private and confidential, reproduction without Micropack approval is prohibited. © Micropack Engineering Ltd, 2018
HELP US TO HELP YOU
Every effort has been made to ensure the accuracy in the contents of our documents; however,
Micropack (Engineering) Ltd can assume no responsibility for any errors or omissions in our
documents or their consequences. This document has been processed through Micropack’s QA
procedures pertaining to ISO9001:2015 certification.
Micropack (Engineering) Ltd would greatly appreciate being informed of any errors or
omissions that may be found in our documents. To this end we include a form, given in
Appendix B, for you
to photocopy, complete and return to us so that we take the appropriate
action. Thank you.
CONTENTS
1
Introduction
4
1.1 Features 4
2
Safety Instructions
5
2.1
Specific conditions of use
5
2.2
Cautions
6
2.3
Important Safety Notices
6
2.4
EN 54-part 10 Limitation of use
7
3
Installation
8
3.1
Detector Enclosure
8
3.2
Mounting & Orientation
9
3.3
Wiring Procedure
11
3.3.1
0-20mA Output
12
3.3.2
Relay Output
13
3.3.3
Internal Inter-connections
14
3.4
Installation Checklist
15
3.4.1
Mechanical
15
3.4.2
Electrical
16
4
System Design Guidelines
17
4.1
Power Supply
17
4.2
Cable Selection
17
4.2.1 DC Power 17