To Next PageTo Next Page
Need help?Do you have a question about the Microsat WX3in1 Plus 2.0 and is the answer not in the manual?
Configures the device for APRS station operation or as a digipeater with advanced filtering.
Manages data forwarding between RF and APRS-IS networks (i-gating).
Details support for GPS receivers and Bluetooth interface for data transmission.
Covers integration of weather stations and reporting telemetry data.
Explains firmware updates and remote access via WWW and Telnet.
Describes front and rear panel connectors, buttons, and status LEDs.
Details radio connector pinout, audio levels, PTT, and filter jumper settings.
Guides connection of RS-232, RS-485, thermometer, GPS, and Bluetooth devices.
Covers reading, writing, importing, and exporting device configuration settings.
Configures radio parameters, digipeater rules, and beacon transmissions.
Details network settings and APRS-IS server connections for data forwarding.
Guides configuration for telemetry, weather reports, and external device interfaces.
Enables remote access for monitoring and debugging via web browser or Telnet client.
Provides instructions for updating the device firmware remotely using TFTP protocol.
Addresses common problems and provides solutions for connectivity and operational issues.
General