update (in seconds).
10.14. External interfaces Tab
This Tab is related to settings of all external devices and interfaces which may me
connected to WX3in1 Plus 2.0 using rear panel serial ports.
10.14.1. External interfaces / RS-232 ports
• “BT/Microsat Bluetooth connected” - enable this if you have BT/Microsat
Bluetooth interface connected to device serial port.
If you want Bluetooth module connected to serial port, then only port 1 is operational
(in Bluetooth mode) and port 2 is disabled.
• “RS-232 port 1” - selection of serial port 1 function,
• “RS-232 port 2” - selection of serial port 2 function,
Not all RS-232 port 1, port 2 setting combinations are possible.
If WS-2300 or WS-2350 station is selected on one port, then the other port can work in
RX-only mode (e.g. GPS).
45
To Next Page