10.11.2. Remote access / Telnet
• “Telnet user” - username to access your WX3in1 Plus 2.0 telnet service,
• “Telnet password” - password to access your WX3in1 Plus 2.0 telnet service,
• “Telnet port” - telnet IP port number,
• “Telnet debug messages” - options in this group allow to select which telnet
debug messages are on by default every time you connect to you WX3in1 Plus 2.0
with telnet terminal.
Telnet access can be very useful for debugging of your WX3in1 Plus 2.0 configuration and
the whole installation. Skilled user can resolve most problems by analyzing debug
messages sent by WX3in1 Plus 2.0 in a fashion similar to Linux system log. Recommended
telnet client is Putty, a free implementation of terminal for Windows and Linux
platforms: http://www.chiark.greenend.org.uk/~sgtatham/putty/.
37
To Next Page