Mounting the Camera
System Components
2
MicroHAWK MV-20 / MV-30 / MV-40 Smart Camera Guide 2-19
Mounting the Camera
Mount and Position the Camera
1. Position the camera at a focal distance of one inch or more from a test object.
2. Tip the camera relative to the object to avoid the glare of direct (specular) reflection.
The case parting line should be perpendicular to the plane of the symbol by either
pitching the symbol or the camera. Avoid excessive skew or pitch. Maximum skew is
±30°; maximum pitch is ±30°.
To Next Page
Loading...
