Microscan MicroHAWK MV-20 - Page 73

MicroHAWK MV-40 External Illumination Control and Wiring
Optics and Lighting
4
MicroHAWK MV-20 / MV-30 / MV-40 Smart Camera Guide 4-11
Wiring for ON/OFF Illumination (NPN Only)
Warning: Contact between Pin 5 (gray wire) and any voltage source greater than 3.5VDC
will damage the illuminator.
* Insulate Pin 5 (gray wire)
MicroHAWK MV-40
Connector A
Smart Series Illuminator
Connector
Smart Series Illuminator
Pin Signal Name
1 +24VDC
2 Trigger –
3 DC Ground
4 Trigger +
5 Dim
MicroHAWK (Connector A)
Pin Signal Name
2 Power
7 and 12 Ground and Output Common
7 and 12 Ground and Output Common
2 Power
6 Output 3
to
to
to
to
to