Chapter 1 Visionscape® Overview
1-14 Visionscape FrontRunner™ User’s Manual v4.1.3, April 2012
Combining Jobs for Operation as a Multi-Inspection Job
on the VS-1 Smart Camera
Because the VS-1 Smart Camera Non-Volatile Memory file system does
not support multiple separate avp files in this release, separate inspection
Jobs that would live in separate avp files for other devices must be
combined into a single avp with multiple inspections for the purpose of
running on the Smart Camera. This is done by loading each avp into a
separate Software System (which does not change the camera definition
selected and other system dependent parameters like IO assignment),
and then copying all the Inspections of the second avp and pasting them
into the first avp. Then, the first avp can be saved to disk and
loaded/flashed later onto the desired VS-1 Smart Camera device.
To Next Page
Loading...
