Microscan Visionscape FrontRunner - Page 49

Windows You’ll See In FrontRunner™
FrontRunner™
2
v4.1.3, April 2012 Visionscape FrontRunner™ User’s Manual 2-27
Note: You can start the AvpBackplane directly by selecting
Start > Visionscape > Visionscape Backplane.
To add a Software System button, first start and then exit
FrontRunner™. Right click on the VS tray icon. Click Display
AvpBackplane. The Visionscape
®
AvpBackplane dialog box is
displayed. Click Add. Type in a name for the Software System
and click OK. When you restart FrontRunner™, the Software
System button will be displayed in the Device Button area of
FrontRunner™ (Figure 2–13).
To delete a Software System button, right click on the VS tray
icon. Click Display AvpBackplane. The Visionscape
®
AvpBackplane dialog box is displayed. Highlight the name of the
Software System you want to delete. Click Remove, then Yes,
and finally OK.
– You cannot add or delete buttons for the vision GigE Camera;
this is done automatically.
– You can add and delete Smart Camera buttons. To add a Smart
Camera button, click Add Button. FrontRunner™ displays the
Select Device dialog box. Highlight (to select) a Smart Camera,
and click OK. FrontRunner™ adds the button.
Note: A red diskette in a device button indicates that the current Job
on the device has been changed through editing.
• Device Bar — This area contains icons and messages that display
information about devices to which you are connected:
– <no device selected>
– <device> Live Video
– <device> Editing
– <device> Tryout Mode