Microsemi Adaptec ASR-8405E - Installing Driver and Operating System; Creating a Driver Disk

7 Installing the Driver and an Operating System
This chapter explains how to install your Microsemi Adaptec RAID controller driver and an operating system
on a bootable array (see Creating a Bootable Array bootable arrays creatingarrays (bootable)).
Note:
1. To install the driver on an existing operating system, see Installing the Driver on an
Existing Operating System installation driverdriver installation.
2. To install the Linux drivers from source with Dynamic Kernel Module Support (for
persistence across across kernel updates), download the Linux Driver Source Code
package from the support page for your product at start.microsemi.com, then follow
the instructions in the embedded Readme.
7.1 Before You Begin
• Install and connect your RAID controller and internal disk drives (see Installing the Controller and Disk
Drives).
• Create a bootable array (see Creating a Bootable Array bootable arrays creatingarrays (bootable)).
• Download drivers from the web
• Create a driver disk (see the following section)
7.2 Creating a Driver Disk
Download the latest drivers from the Web, then create a driver disk by completing the steps below. You
will need a USB ash drive to complete this task. If the driver binary is an iso image, use a writable CD
instead of a ash drive.
To download drivers and create a driver disk:
1. Open a browser window, then type start.microsemi.com in the address bar.
2. Select your RAID controller family and controller model.
3. Select your operating system version, then select the appropriate driver from the list.
Note: For Linux OSs, the list of drivers typically includes a rpm le and an Images le.
Select the Images le only if you are installing the driver on an existing operating
system (for more information, see Installing the Driver on an Existing Operating System
installation driverdriver installation).
4. Click Download Now and accept the license agreement.
5. When the download completes, extract the contents of the driver archive le to a temporary location.
If the archive includes drivers for multiple operating system versions (Windows, for instance), each
driver is stored in a separate folder.
6. Change to the folder for your operating system version, as needed.
7. Copy the driver binary le or the entire driver folder contents to a USB ash drive. For Debian, Ubuntu,
and Fedora Linux, be sure to extract the contents of the .tgz les rst.
If the driver binary is an iso image, see Step [ 8 ] .
8. If the driver binary is an iso image  for instance, for Citrix XenServer  burn the iso to a writeable CD.
Use whatever tool you prefer to burn the CD, such as an interactive, GUI-based, tool or the Linux
command line.
Note: For VMware ESXi 5.5 and VMware ESXi 6.0, see Installing with VMware ESXi .
28
Microsemi Proprietary and Condential. Installation and User's Guide Revision 5
Installing the Driver and an Operating System