1. Start the ARC utility in uEFI mode (see Ctrl-A or uEFI/HII? Unied Extensible Firmware Interface
(uEFI)Human Interaction Infrastructure Interface (HII)HII interfaceuEFI on page 57).
2. Select Administration, then select Save Support Archive.
3. Select the device where the support archive information will be gathered and stored, then press Enter.
The system gathers the logs and statistics for the device and displays the path where the information
is saved.
4. Press any key to complete the operation and exit.
C.11 Viewing the Event Log
The BIOS-based event log records all rmware events, such as conguration changes, array creation, and
boot activity.
Some events are not stored indenitely—the event log is cleared of any non-persistent events each time
you restart your computer; additionally, once the log is full, new events overwrite old events.
To view the event log:
1. Start the ARC utility (see Running the ARC Utility).
2. Select the controller you want, then press Enter.
3. When the ARC utility menu appears, press Ctrl+P.
4. Select Controller Log Information, then press Enter.
The current event log opens.
69
Microsemi Proprietary and Condential. Installation and User's Guide Revision 5
Using the Microsemi Adaptec RAID Conguration Utility
To Next Page
Loading...
