To install the driver on XenServer (where xxxxx is the build # and .x is the OS version):
1. Using a remote copy utility, copy the driver RPM le to a local directory on XenServer. This example
uses Linux scp to copy the driver to /tmp/aacraid:
scp /mnt/sda1/linux/driver/citrix-aacraid-1.2.1-xxxxx.xen-6.x.rpm
root@<xen-server-ip>:/tmp/aacraid
2. Install the driver module rpm:
rpm -ivh /tmp/aacraid/citrix-aacraid-1.2.1-xxxxx.xen-6.x.rpm
3. Reboot your computer.
36
Microsemi Proprietary and Condential. Installation and User's Guide Revision 5
Installing the Driver on an Existing Operating System
To Next Page
Loading...
