MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
111
Function name:
LACP System Priority
Function description:
It is used to set the priority part of the LACP system ID. LACP will only aggregate together
the ports whose peer link partners are all on a single system. Each system supports LACP
will be assigned a globally unique System Identifier for this purpose. A system ID is a 64-bit
field comprising a 48-bit MAC Address and 16-bit priority value. The System Priority can be
set by the user. Its range is from 1 to 65535. Default: 32768
Fig.3-51
To Next Page
Loading...
