Microsens MS453522M - Local Commands of CLI

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
147
4-2-2. Local Commands of CLI
 802.1X
set max-request
Syntax:
set max-request <port-range> <times>
Description:
The maximum number of times that the state machine will retransmit an EAP Request packet to
the Supplicant before it times out the authentication session.
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<times>: max-times , range 1-10
Possible value:
<port range> : 1 to 8
<times>: 1-10, default is 2
Example:
MICROSENS(802.1X)# set max-request 2 2
set mode
Syntax:
set mode <port-range> <mode>
Description:
To set up the 802.1X
authentication mode of each port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<mode>: set up 802.1X mode
0:disable the 802.1X function
1:set 802.1X to Multi-host mode
Possible value:
<port range> : 1 to 8
<mode>: 0 or 1
Example:
MICROSENS(802.1X)# set mode 2 1