MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
16
2-1-4. Configuring the Management Agent of 8 Port Gigabit Ethernet Switch
We offer you three ways to startup the switch management function. They are RS-232
console, CLI, and Web. Users can use any one of them to monitor and configure the switch. You
can touch them through the following procedures.
Section 2-1-4-1: Configuring the Management Agent of 8 Port Gigabit Ethernet Switch through
the Serial RS-232 Port
Section 2-1-4-2: Configuring the Management Agent of 8 Port Gigabit Ethernet Switch through
the Ethernet Port
Note: Please first modify the IP address, Subnet mask, Default gateway and DNS through RS-232
console, and then do the next.
To Next Page
Loading...
