Microsens MS453522M - Page 153

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
148
set port-control
Syntax:
set port-control <port-range> <authorized>
Description:
To set up 802.1X status of each port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<authorized> : Set up the status of each port
0:ForceUnauthorized
1:ForceAuthorized
2:Auto
Possible value:
<port range> : 1 to 8
<authorized> : 0, 1 or 2
Example:
MICROSENS(802.1X)# set port-control 2 2
set quiet-period
Syntax:
set quiet-period <port-range> <sec>
Description:
A timer used by the Authenticator state machine to define periods of time during when it will
not attempt to acquire a Supplicant.
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<sec> : timer , range 0-65535
Possible value:
<port range> : 1 to 8
<sec> : 0-65535, default is 60
Example:
MICROSENS(802.1X)# set quiet-period 2 30
set reAuthEnabled
Syntax:
set reAuthEnabled <port-range> <ebl>
Description:
A constant that define whether regular reauthentication will take place on this port.
Argument:
<port range> : syntax 1,5-7, available from 1 to 8
<ebl> :
0:OFF Disable reauthentication
1:ON Enable reauthentication
Possible value:
<port range> : 1 to 8
<ebl> : 0 or 1, default is 1
Example:
MICROSENS(802.1X)# set reAuthEnabled 2 1
set reAuthMax
Syntax:
set reAuthMax <port-range> <max>
Description:
The number of reauthentication attempts that are permitted before the port becomes
Unauthorized.
Argument: