MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
132
Function name:
Ping Test
Function description:
Ping Test function is a tool for detecting if the target device is alive or not through ICMP
protocol which abounds with report messages. The switch provides Ping Test function to let
you know that if the target device is available or not. You can simply fill in a known IP
address and then click <Ping> button. After a few seconds later, the switch will report you
the pinged device is alive or dead in the field of Ping Result.
Parameter description:
IP Address:
An IP address with the version of v4, e.g. 192.168.1.1.
Default Gateway:
IP address of the default gateway.
For more details, please see the section of IP address in Chapter 2.
Fig. 3-70
To Next Page
Loading...
