Microsens MS453522M - Page 174

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
169
 dhcp-boot
set dhcp-boot
Syntax:
set dhcp-boot <sec>
Description:
To set up the delay time for DHCP Boot.
Argument:
<sec>:range syntax: 0, 1-30. The value “0” is to disable dhcp-boot delay
Possible value:
<sec>:0-30
Example:
MICROSENS(dhcp-boot)# set dhcp-boot 30
show
Syntax:
show
Description:
To display the status of DHCP Boot.
Argument:
None.
Possible value:
None.
Example:
MICROSENS(dhcp-boot)#show
dhcp boot : Enable
Second : 10