Microsens MS453522M - Page 177

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
172
 gvrp
disable
Syntax:
disable
Description:
To disable the gvrp function.
Argument:
None.
Possible value:
None.
Example:
MICROSENS(gvrp)# disable
enable
Syntax:
enable
Description:
To enable the gvrp function.
Argument:
None.
Possible value:
None.
Example:
MICROSENS(gvrp)# enable
group
Syntax:
group <group number>
Description:
To enter any of gvrp group for changing gvrp group setting. You can change the applicant or
registrar mode of existing gvrp group per port.
Argument:
<group number>: enter which gvrp group you had created, using value is vid. Available range: 1
to 4094
Possible value:
<group number>: 1~4094
Example:
MICROSENS(gvrp)# show group
GVRP group information
Current Dynamic Group Number: 1
VID Member Port
---- --------------------------------------------------
2 5