MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
175
set restricted
Syntax:
set restricted <range> <enable|disable>
Description:
To set the restricted mode for each port.
Argument:
<range>: port range, syntax 1,5-7, available from 1 to 8
<enable>: set restricted enabled
<disable>: set restricted disabled
Possible value:
<range>: 1 to 8
<enable|disable>: enable or disable
Example:
MICROSENS(gvrp)# set restricted 1-8 enable
MICROSENS(gvrp)# show config
GVRP state: Enable
Port JoinTime Leave Time Leave All Time Applicant Registrar Restricted
---------------------------------------------------------------------------------------------------------------------------
1 20 60 1000 Normal Normal Enable
2 20 60 1000 Normal Normal Enable
3 20 60 1000 Normal Normal Enable
4 20 60 1000 Normal Normal Enable
5 20 60 1000 Normal Normal Enable
6 20 60 1000 Normal Normal Enable
7 20 60 1000 Normal Normal Enable
8 20 60 1000 Normal Normal Enable
To Next Page
Loading...
