Microsens MS453522M - Page 183

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
178
 hostname
hostname
Syntax:
hostname <name>
Description:
To set up the hostname of the switch.
Argument:
<name>: hostname, max. 40 characters.
Possible value:
<name>: hostname, max. 40 characters.
Example:
MICROSENS# hostname Company
Company#
 igmp
set igmp_snooping
Syntax:
set igmp_snooping <status>
Description:
To set up the mode of IGMP Snooping.
Argument:
<status>: 0:disable , 1:active , 2:passive
Possible value:
<status>: 0,1or 2
Example:
MICROSENS(igmp)# set igmp-snooping 2
show
Syntax:
show
Description:
To display IGMP snooping mode and IP Multicast Table.
Argument:
None.
Possible value:
None.
Example:
MICROSENS(igmp)# show
Snoop Mode: Active
IP Multicast:
1) IP Address : 224.1.1.1
VLAN ID : 0
Member Port : 22