MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
197
show conf
Syntax:
show conf
Description:
To display the each port’s configuration about state, speed-duplex and flow control.
Argument:
None.
Possible value:
None.
Example:
MICROSENS (port)# show conf
show detail-counter
Syntax:
show detail-counter <#>
Description:
To display the detailed counting number of each port’s traffic.
Argument:
<#>: port, available from 1 to 8
Possible value:
<#>:1 ~ 8
Example:
MICROSENS (port)# show detail-counter 5
show sfp
Syntax:
show sfp <port>
Description:
To display the SFP module information.
Argument:
<port>: SFP port of the switch, available from 7, 8
Possible value:
<port>: 7, 8
Example:
MICROSENS (port)# show sfp 7
To Next Page
