Microsens MS453522M - Page 204

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
199
 qos
set advance-layer4
Syntax:
set advance-layer4 <port-range> <#> <tcp/udp port> <default> <match>
Description:
To set class of ports on advanced mode of Layer 4 qos.
Argument:
<port-range>: port range, syntax 1,5-7, available from 1 to 8
<#>: special UDP/TCP port selection, range: 1-10
<tcp/udp port range>: 0-65535.
<default>: default class (all other TCP/UDP ports). 1: high, 0: low
<match>: special TCP/UDP class. 1: high, 0: low
Possible value:
<port-range>: 1 to 8
<#>: 1-10
<tcp/udp port range>: 0-65535
<default>: 1 or 0
<match>: 1 or 0
Example:
MICROSENS(qos)# set advance-layer4 5 2 80 1 0
set default
Syntax:
set default <class>
Description:
To set priority class of the packets that qos won’t affect.
Argument:
<class>: class of service setting. 1: high, 0: low
Possible value:
<class>: 1 or 0
Example:
MICROSENS(qos)# set default 1