Microsens MS453522M - Page 206

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
201
set pri-tag
Syntax:
set pri_tag <port-range> <tag-range> <class>
Description:
To set class of ports on vlan tag-based qos.
Argument:
<port-range>: port range, syntax 1,5-7, available from 1 to 8
<tag-range>: tag priority level, syntax: 1,5-7, available from 0 to 7
<class>: class of service setting. 1: high, 0: low
Possible value:
<port-range>: 1 to 8
<tag-range>: 0 to 7
<class>: 1or 0
Example:
MICROSENS(qos)# set pri-tag 1-7 1-2 1
set simple-layer4
Syntax:
set simple-layer4 <#>
Description:
To set class of ports on simple mode of Layer 4 qos.
Argument:
<#>: layer-4 configuration mode, valid values are as follows:
0: disable ip tcp/udp port classification
1: down prioritize web browsing, e-mail, FTP and news
2: prioritize ip telephony (VoIP)
3: prioritize iSCSI
4: prioritize web browsing, e-mail, FTP transfers and news
5: prioritize streaming Audio/Video
6: prioritize databases (Oracle, IBM DB2, SQL, Microsoft)
Possible value:
<#>:0~6
Example:
MICROSENS(qos)# set simple-layer4 2