Microsens MS453522M - Page 222

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
217
show lacp-priority
Syntax:
show lacp-priority
Description:
To display the value of LACP Priority.
Argument:
None
Possible value:
None
Example:
MICROSENS(trunk)# show lacp-priority
LACP System Priority : 32768
show status
Syntax:
show status
Description:
To display the aggregator status and the settings of each port.
Argument:
None.
Possible value:
None.
Example:
MICROSENS(trunk)# show status
Trunk Port Setting Trunk Port Status
------------------------------------------------------------------ ------------------------------------
port Method Group Active LACP Aggtregator Status
====== ======== ======= ============= ============= ========
1 None 0 Active 1 ---
2 None 0 Active 2 ---
3 LACP 2 Active 3 ---
4 None 0 Active 4 ---
5 None 0 Active 5 ---
6 None 0 Active 6 ---
7 None 0 Active 7 ---
8 None 0 Active 8 ---