调高器说明书
3 indicator lights.
Power:
when the light is on, it is in power-on state.
Manual: when t
he light is on, it is in manual operation mode; at the
same time, t
he aut omatic indicator light is off.
Automatic: when t
he light is on, it is in automatic operation mode, at
the same time, the manual indicator light is off.
3 buttons.
Manual/ automatic: switchi
ng between manual and automatic modes.
Ascend: the cutting torch ascends manually.
Descend: the cutting torch descends manual
ly.
2 knobs, as shown i
n Fig. X-2.
Height: in automatic mode, the height of cutting torch is adjusted.
adjusted.
Sensitivity: in automatic mode, the control sensitivity of the cutting torch is
*11.2 Operation Guide
When it is powered on, the contro ller will enter manual operation
mode and the indicator light " anual" will turn on while the
45
PDF 文件使用 "pdfFactory Pro" 试用版本创建 ww w.fine
rint.com.cn
To Next Page
Loading...
