调高器说明书
who violates shall undertake all the liabilities fo r t he loss.
1.3 Warnings
Please
read and strictly comply with the following instructions before operating the product, thus
to
assure the designed product control accuracy and prevent any damage and accident.
Installation must be carried out by certified technical personnel with relevant
experiences.
Please thoroughly read the instructions before starting installation.
Make sure the local power supply satisfies the required specifications.
！
Installat ion, plugging or unplugging power cord are prohibited when
the power switch is on.
The product should be positioned far away from any heat source if possible.
The controller shell must be grounded well to avoid electric shock or
affecting the controller.
The work piece must be well grounded too and mai ntain a good connection with
the controller shell for assured accuracy of height control.
Note: If the controller shell and the work piece are not properly grounded, the
height controller will not
work normally.
Please handle the product with care and make sure no impact or
shock; otherwise, damage to the product might be incurred. .
Never try to disassemble the product or modify its internal construction;
otherwise, accident or fault might occur.
3
To Next Page
Loading...
Need help?
General
