Microtek LS-3800 User Manual

4 LS-3800 User's Manual
• Do not use the scanner near water. Never spill liquid of any kinds on the
product, or it may result in electric shock or other hazards.
• This scanner should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including ampliers) that produce
heat.
• Do not store the scanner in which it may be exposed to direct sunlight.
Using the Scanner
• When opening the upper cover of the scanner, make sure that it has been
lifted to a proper position. The quick and sudden drop of the upper cover
could result injury or damage to users or equipment.
• When opening or closing the upper cover of the scanner, please use it
carefully and watch out for pressing your hands.
Maintenance and Service:
• When the scanner is going to be cleaned, ensure to turn off the power of
each device and unplug the power cable from the AC outlet.
• When you need a repair service, unplug the scanner from the power outlet
and consult qualied service personnel.
• When replacement parts are required, use replacement parts that are
specied by the manufacturer or have the same characteristics as the
original parts.
Lift the upper
cover of the
scanner to a
proper position to
avoid its sudden
drop.
Attention: When opening
or closing the upper cover
of the scanner, use it
carefully and watch out for
pressing your hands.

Microtek LS-3800 Specifications

Scanning

resolution	800 dpi
scanning area	24" x 37" (610 mm x 940 mm)
scanning speed	30 sec @ 200 dpi, A1 color

Power

voltage	AC 100V to 240V
frequency	50/60 Hz
current	1.7A Max

Operating Environment

operating temperature	50° to 95°F (10° to 35°C)
relative humidity	20% to 85%
light source	LED (Light Emitting Diode)

Weight and Dimensions

dimensions	52.4" x 34.3" x 34.7"
weight	379 lbs.
dimensions in mm	1330 mm x 870 mm x 880 mm