ScanMaker i800 Supplement 17
Scanning Regular, Non-Damaged Photos (1)
This scenario uses the Standard Control Panel.
1. Raise the scanner lid, and place the photo to be
scanned face down on the scanner glass surface.
Position the top end of the photo towards the
back of the scanner.
Note: For the automatic cropping feature to
work correctly during the preview scan of your
photo, make sure the Black Mat is attached on
the scanner lid before you launch ScanWizard 5.
Resize the scan
frame to adjust
the actual size of
your scan
• Allows you to switch to the
Advanced Control Panel
• Shows the scanner type,
model, and status
• Contains the built-in
ScanWizard 5 help
• Exits ScanWizard 5
• Minimizes ScanWizard 5
(Windows only)
Selections and options for
image settings
The Black Mat
comes
preattached to
the scanner lid.
2. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the
ScanWizard 5 Standard Control Panel.
When ScanWizard 5 launches, it automatically performs a fast preview of the
material on your scanner glass surface and displays it in the preview area.
3. In the preview window, you can resize the scan frame (floating dotted line) around
the image by dragging on the edge or corner of the scan frame to determine the
final size of the actual scan.
4. Click the Original button, then select Photo.
5. Click the Scan to button to scan the image.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
