12 ScanMaker i900 Installing and Getting Started
Using the Glass Holder
To scan large or non-standard-sized transparencies:
1. Place the film face down on top of the glass surface of the holder.
2. Place the vinyl strip on the edges of the transparency to secure the film in place.
3. Insert the holder all the way into the transparency bay (the drawer or lower
compartment) of the scanner.
Note:
The glass holder requires regular cleaning. To clean, use mild glass cleaning solution,
and wipe the glass plate gently with lint-free lens-cleaning cloth to prevent leaving
fiber residues.
To Next Page
Loading...
