Need help?Do you have a question about the Midas M32R and is the answer not in the manual?
General| Channels | 40 |
|---|---|
| Mix Buses | 25 |
| Matrix Buses | 8 |
| Digital Signal Processing | 40-bit floating point |
| Type | Digital |
| EQ Bands | 4-band parametric |
| Talkback | Yes |
| Sample Rate | 48 kHz |
| Networking | Ethernet |
| Display | 7" TFT |
| Effects | 8 x FX engines |
| Data I/O | Ethernet |
| Computer Connectivity | USB, Ethernet |
| I/O Expansion Slots | 1 |
| MIDI I/O | In/Out |
| Word Clock | Yes |
| Control | Yes |
| Inputs | 32 |
General safety advice for operating the equipment.
Guidance on connecting power and handling voltage.
Instructions for safely moving, installing, and locating the device.
Safety measures to prevent damage from static discharge.
Warnings against removing protective guards or operating damaged equipment.
Details on the controls for input channels on the console's strip.
Controls for group and bus channels on the console's strip.
Controls for channel configuration and microphone preamplifier settings.
Controls for the noise gate effect on selected channels.
Controls for the compressor effect on selected channels.
Controls for adjusting the frequency response of channels and buses.
Functionality for playing back audio from USB and updating firmware.
Overview of the console's main display screen and its sections.
Mapping console parameters to assignable controls for customisation.
Switching between input, bus, and FX fader layers and enabling Sends on Faders.
In-depth control of the channel compressor effect.
Adjusting channel EQ parameters with four or six bands.
Configuring which parameters are saved or switched with console scenes.
Protecting specific channels from changing during a scene change.
Detailed specifications for processing, connectivity, and input/output characteristics.
Configuration of MIDI control for scenes, programs, and remote functions.
Routine maintenance, cleaning procedures, and equipment disposal guidelines.
To Next Page
