6. The Firmware Upgrade Utility
55
Starting the Upgrade
To upgrade the firmware:
1. Run the downloaded firmware upgrade package file either by double-
clicking the file icon, or by opening a command line and entering the full
path to it. The Firmware Upgrade Utility main screen appears. The
devices capable of being upgraded are listed in the Device List panel:
2. Click Next to perform the upgrade.
If you enabled Check Firmware Version, the utility compares the device's
firmware level with that of the upgrade files. If it finds that the device's
version is higher than the upgrade version, it brings up a dialog box
informing you of the situation and gives you the option to continue or cancel.
To Next Page
Loading...
Need help?
General
