Service Manual_2018-V2.0
23
8.4Air duct components refrigerating chamber and fan motor
Air duct components in freezing chamber
1）Remove two screws from the refrigerating air duct
with a cross screwdriver;
2）Pull all connector terminals out of the refrigerating
air duct to remove its components;
8.5Air duct components in freezing chamber and fan motor(None)
Air duct components in freezing chamber
All accessories in the freezing chamber should be
dismantled before removing the air duct components.
1）Remove 2 screws on the cover plate of the freezing air
duct using a cross screwdriver;
2）Pull out it from the bottom of freezer chamber air
duct.3）Pull out the connector terminal of the fan motor;
4) The reverse operation for assembly
To Next Page
Loading...
