EasyManua.ls Logo

Midea MDDM-20DEN7-QA3 - Installation Instructions 1

Midea MDDM-20DEN7-QA3
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Positioning the Unit
The dehumidifier should be placed in the area where dehumidification is desired most. Adjacent rooms in
which dehumidification is also desired should allow adequate airflow in and out of the space containing the
dehumidifier.
• Do not use outdoors.
• This dehumidifer is intended for indoor residential
applications only. This dehumidifier should not be
used for commercial or industrial applications.
• Place the dehumidifier on a smooth, level floor
strong enough to support the unit with a full
bucket of water.
• Allow at least 8” of air space on all sides of the
unit for air circulation (at least 16” for air outlet).
• Place the unit in an area where the temperature
will not fall below 41°F (5°C). The coils can
become covered with frost at at lower
temperatures, which may reduce performance.
• Place the unit away from any clothes dryer, heater
or radiator.
• Close all doors, windows, and other openings to
the outdoors in the room.
Fig. 5
INSTALLATION INSTRUCTIONS
More than
40cm(16”)
More than
40cm(16”)
More than
20cm(8”)
More than
20cm(8”)
More than
20cm(8”)
Front View Top View
Fig. 6
Caster installation and disassembly instructions(some units)
Installation:
1.Attach the caster to the bottom of the unit.
2.Use a block to fix it as shown in the picture.
Disassembly:
1.To remove the caster , use a screwdriver to prop up the block, then take it down.
2.Then remove the caster.
blockcaster
bottom of unit