Midea MDDM-20DEN7-QA3 - Nesting and Storing Instructions

20
CAUTION
NESTING AND STORING INSTRUCTIONS
When carrying the nested unit, be sure
and use the bucket handle to ensure both
the dehumidifier and bucket are safely
carried.
Fig. 17
Fig. 18
Fig. 20
Fig. 19a
Fig. 19b
Step 1:
Power o and unplug the unit. Then lift the dehumidifier o
the bucket.
Step 2:
Empty all water from bucket.
Step 3:
Make sure to press the tabs on the inside bucket feature in
so that the unit can nest correctly. See Fig. 18.
Step 4:
Rotate dehumidifier 90° in either direction and insert into
bucket to nest.
Step 5:
The dehumidifier is nested and ready to store.
WARNING
Make sure the bucket is empty before
nesting the dehumidifier to avoid risk of
electrical shock.
Make sure
it is empty.
NOTICE
Make sure the power cord is properly tucked into the
power cord storage channel on the back of the
dehumidifier to prevent damage.