Service Manual, 2016-12
10 / 46
3.Installation and commissioning
3.1Handling
1) Protect the refrigerator in moving it
Same as shown as left photo, please move it by hand
cart with cushion
2) Removeallpackingmaterialsandbottomcushion,then
moveintohouseforplacement
3) After moving it to appropriate location, wait for 2 h
ours before power on.
3.2Disassembly (None)
The refrigerator door needs to be dismantled if it cannot enter the room in the whole.
3.3 Installation location
Location that is easy for ventilation shall be
chosen to facilitate heat dissipation, enhance
its performance and reduce the energy
consumption.
To Next Page
Loading...
