EasyManua.ls Logo

Midea UR-BCD280WE-DQ - Test Mode

Midea UR-BCD280WE-DQ
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Manual, 2016-12
31 / 46
9.10Test mode
Test
module
Test items
Testing Method
Expected result
Test
Mode
Enter Test
Mode
Keep pressing the SET button
for 15 seconds and release
LED indicators on Gear 1, 2, 3, 4 and 5
light up and flicker in the frequency of 0.5s,
then the refrigerator enters into test mode
After entering into test mode,
if no button is pressed within
25 seconds
then the refrigerator will exit the test mode
and return to normal operation mode
Select to
enter into
forced
cooling
mode
Enter into test mode and press
button for the first time
LED indicators on Gear 1, 2 and 3 light up
and other LED indicators light off, then the
compressor and the fan will start working
In forced cooling mode, if no
button is pressed within 36
hours,
then the refrigerator will exit the test mode
and return to normal operation mode
Select to
enter into
forced
defrosting
mode
Enter into test mode and press
button for the second time
LED indicators on Gear 3, 4 and 5 light up
and other LED indicators light on, then the
compressor and the fan will stop working,
The heater open, refrigerator into forced
frost
In forced defrosting mode,
when the defrosting sensor
reach a temperature of C and
the defrosting heater has been
working for 3 minutes,
then the refrigerator will exit the test mode
and return to normal operation mode
In forced defrosting mode, if
the temperature of defrosting
sensor is always lower than
C and the defrosting heater
has been working for 1 hour,
then the refrigerator will exit the test mode
and return to normal operation mode
Select to
exit the
test mode
Enter into test mode and press
button for the third time
then the refrigerator will exit the test mode
and return to normal operation mode

Table of Contents

Related product manuals