Midea UR-BCD280WE-DQ - Bar Counter(None); Water Dispenser(None)

Service Manual, 2016-12
27 / 46
master control board and installation box
components;
5） Pry open the buckle of the PCB installation
box with a straight screwdriver to see the
PCB board;
6） Remove 2 screws using a cross screwdriver
to remove the master control board;
7） Pull out the connector terminal and replace
the master control board in reverse steps;
*The temperature control indication sticker is
likely to be damaged when replacing PCB, thus it
is advised to prepare one for standby before
replacement:
Main control board
display control board together
8.8 Bar counter(None)
Disassembly and installation of bar counter
None
Disassembly and installation bar doorseal
None
8.9 Water dispenser(None)
Disassembly and installation of water valve
None