52
(1) Available for master unit.
(2) Only available for master unit, displayed on slave units has no sense.
(3) Need to convert to current compressor output volume, example: compressor output volume is 70，Target frequency =
Actual frequency * 70 / 60.
DISP. CONTENT DISCRIPTION
[0] OFF
[1] C1: Condenser. Running
[2] D1: Condenser. Not running
[3] D2: Reserved
[5] F1: Reserved
[6] F2: Evaporator. Not running
[0] Not in special mode
[1] Oil return
[2] Defrost
[3] Startup
[4] Stop
[5] Quick check
[6] Self cleaning
41 Silent mode setting 0~14, 14 represents the most silent
[0] 0Pa
[1] 20Pa
[2] 40Pa
[3] 60Pa
[4] 80Pa
[5] 100Pa
[6] 120Pa
43 TES Actual temperature=DISP. Unit: ℃
44 TCS Actual temperature=DISP. Unit: ℃
45 DC voltage Actual voltage Unit: V
46 AC voltage Actual voltage Unit: V
47 Quantity of cooling mode IDUs
48 Quantity of heating mode IDUs
49 Capacity of cooling mode IDUs
50 Capacity of heating mode IDUs
[0] No result
[1] Critically insufficient
[2] Significantly insufficient
[3] Normal
[4] Slightly excessive
[5] Significantly excessive
52 Dirty blockage rate
0~10, 10 represents the worst
53 Fan error
54 Software version
55 Last error code
56 Reserved
57 Reserved
58 Reserved
42 Static pressure mode
51 Refrigerant volume
39
40 Special mode
[4] E1: Evaporator. Running
Heat exchanger status
To Next Page