9
EN
Bluetooth Intercom compatibility
The BT Rush is also compatible with Bluetooth Intercom devices.
One Midland BT Rush unit can be paired to maximum two other Midland
BT units and one Universal Intercom (that means in total 4 units via Blue-
tooth including your self).
Midland Intercom
(no Mesh)
Universal Intercom (no Mesh)
Midland Intercom
(no Mesh)
For example you have all Mesh groups active on the Control button and
at the same time you can have your passenger paired via Bluetooth to the
Upward or to the Downward button .
Depending on the setting of the “Bridge“ function , you can decide if the
Bluetooth Intercom is part of the Mesh communication or not. Please
refer to the Bridge setting information in the following pages.
Pair the Midland BT Rush to another Midland BT via
Bluetooth
To pair the Midland BT Rush to another Midland BT unit, you must first
enter the Setup Mode mode:
1. Turn o the unit
2. On the BT Rush press and hold down the Control button about 7 sec.,
until the Red light is on permanently.
3. Now press one of the two buttons (Upward or Downward) for 3 se-
conds depending on which button you would like to use to open the
intercom on the other units. The Blue and Red lights will flash.
4. On the other Midland BT unit repeat the same procedure using any
button available depending on the model (BTPro/BTPro S/BT Rush)
5. When successfully paired, each unit will have the Blue light on for one
second and then go back to the Setup Mode mode (Red light always
on).
6. Now the unit is ready for another pairing procedure, and you can pair
another Midland BT unit following the same procedure, but using a dif-
ferent button.
If you don’t have more devices to be paired, you must exit the Setup Mode
mode before you can use the units:
› Double click on the Control button, the Red light will turn o and the
Blue light will start flashing. You can use now your Midland unit
How to use the Bluetooth Intercom
To use the intercom feature, be sure that all units are turned on and cor-
rectly paired together.
Manual activation in Bluetooth Intercom communication
When in Intercom mode press the button corresponding to the unit you
would like to communicate with (Upward and Downward buttons).
After some seconds the intercom communication will open. The commu-
nication remains active until you press again the same button. To quickly
open the intercom to another person, just press the button corresponding
to the other unit, the previous intercom will be automatically closed and
the new connection will be open (see Table A).
Voice activation (VOX)
The VOX feature allows you to open the Intercom communication simply
by saying something. You can use a simple word like “Intercom” or “Hello
Midland” and when the voice will be detected, you will hear the announ-
cement “VOX”.
A- Manual activation
Mode Upward button Control button Downward button
Mesh Short press: Open/Close Bluetooth
intercom to paired rider
Short press: Open/Close Mesh communi-
cation to the group
Long press: Change mode
Double click: Play music
Short press: Open/Close Bluetooth
intercom to paired rider
To Next Page
Loading...