11
EN
No Midland Intercom
Attention: In order to use the “Universal Intercom” feature the pairing on
the other unit must be done as a phone. The other intercom (non-Midland
brand) will be able to use a phone only if two phones are supported.
You can pair also a Midland unit as Universal Intercom, that means the pai-
ring must be done as a phone (one unit use the Universal Intercom procedure
and the other unit use the pairing to “Phone” procedure).
Pairing the Midland BT Rush to phone and GPS
navigator/TFT Dashboard
The Midland BT Rush unit can be paired to other Bluetooth devices, like
Phone, GPS Navigator. The pairing procedure must be done using the
Vol+ or the Vol- buttons.
› Pairing to the Vol+ button: for Phone with music A2DP stereo, GPS
Navigator with A2DP audio or Bluetooth TFT system integrated in the
motorbike.
› Pairing to the Vol- button: for Phone or GPS Navigator only with
mono HFP audio.
When a device is paired to the Vol+ or Vol- buttons the “Phone” mode
is activated.
Vol + Vol -
MONO
› Phone (HFP Mono)
› GPS mono
MONO and STEREO
› Phone (HFP/A2DP Stereo)
› GPS (HFP/A2DP Stereo)
› TFT system
Background feature
The BT Rush unit keeps always any audio coming from Vol+ or Vol- pairing
always in background to the Mesh communication. In case of Bluetooth
Intercom communication instead, you need to take advantage of the
“Background” feature to have the audio from the device paired on Vol-,
in background.
Background audio on Bluetooth intercom communication
When the Bluetooth Intercom communication is active only the audio
souce paired to the Vol- can be in background to the Bluetooth Intercom
conversation.
All devices paired to Vol- button have higher priority over the Bluetooth
Intercom communication and will interrupt all other audio communica-
tions (including FM Radio and Music).
Background setting for Vol- audio over Bluetooth Intercom
1. Keep pressed Vol- button, you will hear the voice “Background on”.
Now the audio from the Vol- pairing is available in background to the
Bluetooth intercom.
2. Press again the Vol- button and you will hear the voice “Background di-
sable”. Now the audio from the Vol- pairing will interrupt the Bluetooth
intercom communication.
Attention: By default the background is enabled..
Pairing with one or two phones
The cellular phone can be paired to the Vol+ or to the Vol-.
When a phone is paired to the Vol+ or “Vol-” the “Phone” mode is acti-
vated.
An incoming call has always the higher priority, that means all other com-
munications will be closed (Intercom, FM Radio, Music).
If another incoming call will arrive on the second phone, an alert sound
will notify it.
WARNING! In order to have the best performance with your mobile phone,
it is suggested to keep it as close as possible to your BT Rush unit, on the
left side of your body and in the upper pocket of your jacket if it’s possible.
How to pair the Midland BT Rush to a Phone
To pair the Midland BT Rush to a Phone, you must first enter the Setup
Mode mode:
1. Turn o the unit
2. Press and hold down the Control button about 7 sec., until the Red
To Next Page
Loading...