Midland BT RUSH - How to Use a Phone

12
EN
light is on permanently.
3. Now press for 3 seconds the Vol+ (to pair a phone with also A2Dp) or
Vol- button (only mono audio), the Blue and Red lights will flash.
4. Enable the Bluetooth device search feature on your mobile phone
5. After some seconds, “Midland BT Rush” will be displayed on your mo-
bile phone. Follow the pairing procedure of your Phone. If a pin code is
requested you must enter “0000” (four time zero).
When successfully paired, the Blue light of the unit will be on for one se-
cond and then the unit will exit the Setup Mode mode and switch to the
working mode (the Blue light will start flashing).
You can use now your Midland BT Rush together with the Phone.
How to use a Phone
After pairing your phone to the Midland BT Rush unit you must switch
to the “Phone” mode in order to use it. Press the Control button until
you hear “Phone” from the voice announcement. Now all the three main
buttons are dedicated to the phone (see Table B)
Answering a call
When you hear the phone ring, you can answer in two dierent ways:
Vocally:
Simply say one word just after the first ring to answer the call and start
talking.
Manually:
Tap the Upward or Downward button and start talking.
Rejecting a call
If you don’t want to answer, you can let the mobile phone ring or press
the Upward or Downward button for 3 seconds (you will hear one audio
confirmation tone).
Making a call
There are several ways to make a phone call.
To redial the latest number:
Go to Phone Mode
› Phone on “Vol+”: Press Upward button for 3 seconds in order to redial
the latest number (you will hear one audio confirmation tone).
› Phone on “Vol-”: Press Downward button for 3 seconds in order to
redial the latest number (you will hear one audio confirmation tone).
To make a voice call:
› Phone on “Vol+”: Briefly press Upward button. If your mobile phone
supports voice calls, you will be asked to say the name of the contact
you wish to call.
› Phone on “Vol-”: Briefly press Downward button. If your mobile phone
supports voice calls, you will be asked to say the name of the contact
you wish to call.
Priority: Calls have a high priority, which means that all other communica-
tions are temporarily disabled when you receive an incoming call.
Ending a call
There are several ways to end a call:
› Press the Upward button (you will hear an audio confirmation tone).
Midland Intercom
(no Mesh)
Universal Intercom (no Mesh)
Midland Intercom
(no Mesh)
Vol- Long press
On/o Background
Background on
Audio from Vol-in
background to
intercom BT
Background o
Audio from Vol- has
higher priority and
close intercom BT.
Vol+ Long press
On/o Bridge
Bridge on
Mesh and Intercom
Bluetooth can talk
together
Bridge disabled
Mesh and Intercom
Bluetooth can not talk
together