Midtronics DCA-8000 Instruction Manual

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
29
Appendix A: Recommended Scanning ProcedureToyota/Lexus DCA-8000
VIN Scanning
For scanning VINs, the DCA-8000 Diagnostic Charger uses a
handheld wireless barcode scanner. The base of the barcode
scanner is connected to the back of charger using a DB-9 style
connector.
Scanning Tips
• If the barcode scanner light beeps 4 times and the red
light turns on, scan the barcode on the bottom of the base
to pair the devices.
• To charge the scanner, make sure the DCA is plugged in to
power, and the base of the scanner plugged into the DCA.
Appendix A: Recommended Scanning Procedure

Midtronics DCA-8000 Specifications

General

Brand	Midtronics
Model	DCA-8000
Category	Diagnostic Equipment
Language	English