Midtronics GR1-120 - Diagnostic Testing; Enter Battery Rating; Select Battery Location; Select Battery Type

1.3 SELECT CHARGING MODE
Use the DOWN/UP  
buttons to select Diagnostic
Fast Charge. Press the ENTER
↵ ↵
↵ ↵
↵ button to continue.
1.4 SELECT CHARGE TYPE
Use the DOWN/UP  
buttons to select the battery
charge type: Dealer Inventory or In Service. Press the
ENTER
↵ ↵
↵ ↵
↵ button to continue.
1.5 SELECT BATTERY LOCATION
Use the DOWN/UP   buttons to select the location of
the battery: In Vehicle or Out of Vehicle. Press the
ENTER
↵↵
↵↵
↵ button to continue.
1.6 SELECT BATTERY TYPE
Use the DOWN/UP   buttons to select the battery
type: Lead Acid or AGM/Spiral. Press the ENTER
↵↵
↵↵
↵
button to continue.
1.7 ENTER BATTERY RATING
Use the DOWN/UP   buttons to enter the battery
rating from 100 to 1500 CCA. Press the ENTER
↵↵
↵↵
↵
button
to continue. The Diagnostic Fast Charge cycle will begin
automatically.
The charger will control the entire charging session
including the initial diagnostic testing and charging, data
analysis, charging duration, charging level, charging rate,
top-off charging (when appropriate), and final diagnostic
testing.
DIAGNOSTIC TESTING
The charger will quickly perform a number of tests to
analyze the battery. During some initial diagnostic tests it
will display a moving status bar.
If the analysis finds a battery to be bad, the charger stops
and displays Replace Battery or Replace-Bad Cell.
If the analysis finds a good battery with a sufficient state
of charge, the charger stops and displays the results.
• 12 •
Mode
↑↓↑↓
↑↓↑↓
↑↓
Diagnostic Fast Charge
↵↵
↵↵
↵
Battery Location
↑↓↑↓
↑↓↑↓
↑↓
In Vehicle
↵↵
↵↵
↵
Select Charge Type
↑↓↑↓
↑↓↑↓
↑↓
Dealer Inventory
↵↵
↵↵
↵
Select Battery Type
↑↓↑↓
↑↓↑↓
↑↓
Lead Acid
↵↵
↵↵
↵
GR1-120 Charging Modes: Diagnostic Fast Charge
Enter Rating
↑↓↑↓
↑↓↑↓
↑↓
500 CCA
↵↵
↵↵
↵
Analyzing Battery
........
........
....
9.83V 345CCA 0:00:00
Replace Battery AH: 0.0
12.72V 0:00:00
Good Battery AH: 0.0